The primary purpose of the Servo-Type Swing Gate is single or dual direction control of pedestrian access for industrial enterprises, administrative establishments, banks, offices, shops, stations and other sites. Due to its unique shape and variety of models, it can suit any interior.Controlled by
· access control system;
· manual control.
When power goes OFF both directions are free.

Versions of the mechanism:
Gate-GS – Servo.

Pinciple of operation
The initial position locking gear underlies the operation of the Servo-Type Swing Gate. Rotation of the bar in either direction is blocked at the initial position when the electromagnet is engaged, so access is impossible.
When a command signal authorizing access is entered from the control panel:
· The gear rotates the bar 90˚;
· The gear returns the bar to its initial position after a pedestrial has passed.
The Servo-Type Swing Gate can be controlled manually via the control panel.
If the ‘Permit‘ button is pushed and held down, the gear rotates the bar 90˚. If the button is released, the bar is returned to its initial position. If the ‘Free Access‘ button is pushed, the gear rotates the bar 90˚ and holds the bar in position. If the ‘Free Access‘ button is released, the bar is returned to its initial position. When the power network is switched off, the Servo-Type Swing Gate is automaticly supplied power from a backup power source (12 V battery, 7 A·h) operable for at least 4 hours.To be delivered additionally
· Readers posts.
· Readers for access control system.
· Remote radio controler.
· Backup battery 12 V, 7 A·h.

Electrical Specifications
· Voltage:
– from the AC (100–240) V, 50/60 Hz.
– from a DC source 12 V.
· Maximum power consumption 200 W per pass (50 W without servo).
· Degree of protection according to GOST 14254-96 – IP41.